Single-panel doors were the standard in the 1970s and 1980s. Huge doors in one piece covered your garage opening. An opener wasn’t always necessary either. Think about modern properties today, however, single-panel doors are slowly declining in popularity. When you’re ready to upgrade from a single-panel door design to a rollup model, consider these tips to make the installation as smooth as possible. Use this tips for Converting Single-Panel Doors to Rollup Designs.
Spacing for Tracks
Your single-panel door lifts up and down from garage door springs and supports along the lateral sides of the garage. The upper support merely keeps the door level as it swings open. In contrast, the new rollup door will have tracks.
Take a look at the clearance to the sides and above the garage door opening. Any cabinetry, supports or other obstacles may need to be moved or altered. The rollup door uses a set of rollers on tracks in order to glide the assembly up and down. These tracks must always be clear of any obstructions. Take some time to clear away any items before the installer arrives.
Trying a New Opener
Be aware that you may need to upgrade your garage door openers too. Some of the older models don’t have a conversion kit or the weight capacity to support the newer doors. Garage door experts can help you with this conversion detail.
Take a look at a few models for your rollup door. Openers today are lightweight, sleek and operate with a whisper of noise. In many cases, you can get a bundle deal with the door and opener together. Simply talk to your installer about the options. Entirely new components are always a good investment.
Making Overhead Room
Tips for Converting Single-Panel Doors: Regardless if you buy a new opener or use your old model, its location will probably be different. Single-panel doors have varied dimensions in comparison to the rollup designs. Part of the panel sticks out from the garage, which places the opener closer to the door.
Your rollup door, in contrast, must slide all the way into the garage. The opener must be farther back in the structure for overhead clearance. Be sure to remove as many items from the garage’s ceiling as possible, such as stored boxes. The opener can be quickly installed as a result.
Installing the Sensors
Single-panel doors don’t typically have sensors that tell the system if an object is obstructing the opening. Leave space along the opening’s side edges for the sensors. No rollup door can be installed without the sensors. Children and pets are much safer with the sensors telling the door that there’s an obstruction. The door automatically opens wide and remains that way. The obstruction must be moved before the system operates again. Your installer will test these sensors before completing the project.
Converting Single-Panel Doors to Rollup Designs
Give Garage Door Star a call today at (215) 353-5151. We are located in Philadelphia, PA, where you can discuss your property upgrade in comfort. Transform your home’s exterior with a new door from our stock. Your property value has nowhere to go but up.